ArStab-CZ complex stabilizers for PVC. Production and sale in Ukraine.

ArStab-CZ complex stabilizers for PVC

Stabilizers of ArStab-CZ mark are used in processing PVC to physiologically safe film materials. In addition, application of stabilizer in combination with ArStab-1701 product (epoxy soybean oil) promotes enhancement of heat stabilizing effect. Depending on processing technique, necessity in use of additional greases may be omitted.

Physicochemical properties of the product

Name of parameter and unit of measurement	Values for ArStab stabilizers
	CZ-250	CZ-315	CZ-320	CZ-317-P
1. Appearance	Homogeneous mass of color range from daffodil to hazel, free of mechanical impurities. Opalescence is permissible.			Homogeneous pasty mass of color range from white to daffodil, free of mechanical impurities.
2. Weight fraction of volatile substances, %, at most	4	4	4	3
3. Heat stability of PVC blend with stabilizer, min, at least	30	40	40	40
4. Stabilizer density at temperature of 20°C, g/cm3, within	0,850-1,025	0,900-1,030	0,905-1,035	-

Recommendations:
Consumption rate: 0,7-2,0 wp per 100 wp of PVC, subject to formula.

Safety precautions:
Store in tightly closed container with polyethylene inserts.
Keep off from fire.
Commonly used industrial means of protection and first aid.

The company provides technical support for the manufactured goods. Our specialists are ready to furnish detailed information on products and provide consultations, as well as promotional and laboratory specimens.

Packaging:
40 kg, 190 kg, 900 kg.

Production and sale of ArStab-CZ stabilizers for PVC in Ukraine

Production of ArStab-CZ stabilizers for PVC is carried out on the basis of TU U 24.1-32926424-005:2005.

Sales of ArStab-CZ stabilizers for PVC are made from stock in Ukraine.
Products delivery to the customer is possible on contractual conditions.

---

ArStab-CZ stabilizers (kickers)

ArStab CZ-125 - Arstab CZ-153 stabilizers (kickers) play an important role in production of foamed PVC materials, such as floor coating or wallpaper. Proposed products are meant for plastisols of various viscosities and have high foaming rate. Kickers have heat stabilizing action properties, which are in most cases well sufficient for stabilization of the foamed layer.

Physicochemical properties of the product

Name of parameter and unit of measurement	Values for ArStab-CZ stabilizers (kickers)
	CZ-125	CZ-150	CZ-151	CZ-152	CZ -153
1. Appearance	Homogeneous mass of color range from daffodil to hazel, free of mechanical impurities. Opalescence is permissible.
2. Weight fraction of volatile substances, %, at most	10	4	11	11	11
3. Heat stability of PVC blend with stabilizer, min, at least	5	5	5	5	5
4. Stabilizer density at temperature of 20°C, g/cm3, within	0,810-1,170	1,005-1,200	1,005-1,150	0,905-1,150	0,910-1,230

Recommendations:
For selection of applicable product it is necessary to take into consideration following important properties:
Foaming aboundance (density),
Foaming rate (temperature),
Color stability (degree of whiteness),
Influence to paste viscosity,
Volatility.

Consumption: 2-3 wp of kicker per 100 wp of PVC-resin, subject to formula and plastisol properties.

Safety precautions:
Store in tightly closed container with polyethylene inserts.
Keep off from fire.
Commonly used industrial means of protection and first aid.
The company provides technical support for the manufactured goods. Our specialists are ready to furnish detailed information on products and provide consultations, as well as promotional and laboratory specimens.

Packaging:
40 kg, 150 kg, 900 kg.

Production and sale of ArStab-CZ kickers for PVC in Ukraine

Production of ArStab-CZ kickers for PVC is carried out on the basis of TU U 24.1-32926424-005:2005.

Sale of kickers for PVC is made from stock in Ukraine.
Products delivery to the customer is possible on contractual conditions.